QUAKEWORLD 50 Inch White Curved Bumper Lights Bar: Maximum Brightness With All The Hardware Included

QUAKEWORLD Bumper Lights Offroad Led Light Bar

When you spend a lot of time driving in darkness or regularly find yourself in heavy rain, snow or fog, then you’ll understand how dangerous limited visibility can be. In fact, visibility is the number 1 contributing factor to road traffic accidents in the USA.

And that really shouldn’t much of a surprise. But there are ways that can help you avoid becoming such a statistic. With different size LED light bars, you can increase the amount of road that you light up by many factors.

When it comes to improving visibility there really is only one solution, and that is adding more lights. But just choosing any cheap lights can actually have the opposite effect. When you don’t combine the right light color with the best possible beam settings you can actually end up with worse visibility. This is especially the case when driving in fog, snow or rain.

For those of you that want to increase that visibility to an absolute maximum, you should seriously consider this Quakeworld option. It’s certainly one of the brightest available options. And as you’ll see in this review, it also comes with features that make it stand out from the majority of the competition.

So, keep reading to find out exactly what makes this such a great choice.

Quick Overview

 QUAKEWORLD Bumper Lights

First of all, let’s take a look at the size and shape. At 50 inches, this is one of the largest you can fit to cars and trucks. It’s suitable for mounting on the front bumper or better at the top of your windscreen. This is where the shape comes into play perfectly well.

With a curved design it will match the curve of your windscreen and align perfectly with the shape of the roof. You simply mount as far up as possible and it will like it belongs there.

There are a total of 96 LED bulbs in two rows and they provide a huge 288-Watt output. That might not seem much when compared to a standard household bulb of 60 Watts. But you have to consider that LEDs provide a lot more brightness and the light is projected into a beam using mirrors and lenses.

The result is almost 25,000 lumens which measures brightness. Compare that to a standard household bulb of 800 lumens and it will give you an idea how bright they are.

The good news is that the wiring harness and a remote control are included. So, despite the higher price of the kit, you will get everything you need and don’t need to pay extra for the harness. Just keep in mind that the cables might not be long enough for very large commercial trucks.

You can easily switch between spot and flood beam with the remote control. This helps to light up an area far ahead and to the sides. If you drive a lot in rural areas, then that will help to see animals approaching the road a lot sooner.

The light temperature is 6,000K which puts this in the pure white range. This is very important to improve visibility in rain, snow and fog and we’ll have more info on this in the next section.

Finally, the housing is made or aluminum which will ensure that it never rusts or corrodes. And with a waterproof rating of IP67, you won’t have to worry about heavy rain causing problems.

The main negative about this is that the mounting brackets are made with stainless steel and not aluminum. It would have been a nicer combination if they were all aluminum.


  • 50-inch curved bar ideally suitable for roof mounting
  • Huge 288-Watt output providing almost 25,000 lumens
  • ​Easily switch between spot and wide beam with remote control
  • ​Light temperature of 6,000K is in the pure white range
  • ​Wiring harness and remote control included
  • IP67 waterproof and aluminum housing make this very durable


  • Cables are a bit short for larger vehicles
  • Mounting brackets are stainless steel not aluminum

Product Specifications

In this section we’ll take a much closer look at some of the product details. These are important factors that will help you determine if this will end up doing what you need for your individual driving conditions and preferences.


Most people will simply consider the brightness when they think of light quality. While this is important, you should actually first focus on the temperature. The reason for this is that if the temperature is not in the pure white range of 6,000+, the color of the light will actually start reflecting off water droplets.

If you turn such lights on in the rain or fog, you will actually reduce the amount of visibility. This is particularly bad when you head into the yellow spectrum, where you will end up practically reducing how far you can see to zero.

With this Quakeworld option you get 6,000 K LED bulbs which is in the pure white range.


In the world of LED bars, size is always going to mean more light. You can simply add more bulbs that more you extend the length of the bar. Many, products, like this one, will also add a second row of bulbs. And some smaller options will even have 3 rows.

But to avoid excessive drag, we would not recommend installing a very large 3 row bar. You won’t gain that much more sight, and the noise can become very annoying.

At 50 inches, you will have to make sure that it will fit before you place your order. Best thing to do is to grab a measuring tape, and check if you have the space on your roof or bumper.

Adjustments And Usage

The main thing to focus on here is the ability to switch between spot and flood beam. This switches between different sets of bulbs that shine their light at different angles. In spot setting you will get a very long and narrow light funnel ahead. While in flood beam mode you light up an area closer to you, but also much more to the sides.

Flood beam setting is ideal if you think there is risk of animals approaching from the sides of the road. You’ll be able to see them a lot sooner and avoid contact.


Because the light bar will stay attached and probably be outdoors most of the time, you want to make sure that it will stand up to the elements. Heavy wind, rain and snow can cause major damage to components that are not designed to keep dust and water out.

This Quakeworld option has an IP67 rating which means it can even be submerged in water for 30 minutes, before showing signs of damage. And because the housing is made from aluminum alloy, it will never rust or corrode either.

What’s Included?

Unlike many other products available, you will actually receive everything you need. This includes:

  • 50-inch LED bar
  • Wiring harness and relay
  • ​Remote control switch
  • Installation instructions

Now, dependent on where you’re going to fit the light bar, you will need a few tools as well. The installation instructions section will give you some more specific information.

There is also a chance that the mounting brackets that are included won’t fit your vehicle. This is not the end of the world, as you can replace them with a more suitable option. If you use the above Amazon price check button, you will see that there is a vehicle compatibility checker at the very top.

Some of the most common and popular vehicles on the road are going to be compatible, but if yours isn’t then make sure to add a suitable bracket to your basket.

Suitable Uses

The great thing with light bars is that they can be used for so many different things. Essentially, anywhere that has limited light, can easily be lit up with a light bar. The obvious use is on cars and trucks, but you can also install them on boats, ATVs and emergency vehicles (more on this in the next section).

One area that these lights have been very successfully used is on mining and construction sites. Because you might have limited lighting features in place, it can be very difficult to provide a safe working environment.

You can simply attach the light bar to any type of stationary structure. Or you can create a mounting frame that can easily be moved around so that as workers move to different areas, you can quickly change the light set up.

The only difficulty is going to be to set them up so that they don’t end up blinding workers. So, make sure you carefully plan the installation and check with others where there it’s blinding before it becomes an issue.

Installation Information

Installing light bars is not a particularly tricky job. With a little bit of DIY skills, you can be up and running in less than an hour. And if you’ve fixed things on your truck before then this really shouldn’t be much pf a problem to you.

First of all, you want to decide where you’re going to mount it. If you’re going with the standard roof mounting at the top of your windscreen, then the included brackets are really simple to attach. When attaching to your bumper or front bull bar, then things become a bit more difficult. You will need to drill holes in order to securely attach it.

Before you get your drill out, just make sure you measure twice, even three times. With the help of a friend you can hold the bar and bracket in place to make sure you don’t make any mistakes.

It’s very important that you get this part right, as an off center installation will look terrible.

Next up is the wiring, and this should also be carefully planned. You want to hide the wires, so that there is less risk of them getting caught on anything. Essentially, they have to feed to your battery. If you’re unsure about this part, then maybe check with a mechanic to advice on which way to best run the cables.

What Vehicles Will it Fit?

Now, this light bar is large. Very large indeed. So the main question really is what vehicles will it fit. You don’t want to be hacking the mounting to force it onto a vehicle that is too small.

But as long as it fits you really won’t have much trouble using it with all types of on and off-road vehicles. For car and trucks it’s going to be ideal for safer road driving in winter months when it’s dark for long parts of the day. But also the rain, snow and fog conditions will be quickly improved with better visibility.

If you have a larger ATV then you can vastly improve your distance of sight while driving off-road and cross country. The further you can see ahead the less likely you will be to get into trouble. It can be annoying and even dangerous to have to reverse out of difficult situations.

Finally, you can also consider this product if you have a fishing or pleasure boat. When you take your boat out on rivers or lakes in the dark, then you want to be able to see as far as possible to avoid running into trouble.

With this extra-large light bar, you can simply install 2 or 3 of them to get far better all-round view to see exactly where you need to navigate.


If you’re looking for maximum visibility and a fully featured installation kit then this Quake world curved bar is going to be the ideal solution. It provides excellent brightness at exactly the right color of light.

Your visibility will improve by many multiples, reducing your risk of becoming a traffic statistic. Whether you have a car, truck, ATV or fishing boat, you’ll be able to get this easily and quickly set up, with just a few simple DIY skills.